Secondhand Websites

Sold Expobar G10 2 Group Commercial Coffee Espresso Machine - Reconditioned/Serviced - Cumbria

Description

Selling a fully reconditioned and serviced Expobar G10 coffee/espresso machine, perfect for small to medium businesses! This is the tall cup model, great for latte glasses.

The machine has had a full restoration including (but not limited to):

Deep clean of all components and frame.
Full acid bath of all copper components to remove scale buildup, including boiler, piping, heating element, and water level sensor.
Complete descale of grouphead.
Complete descale of valves, flow meters, and pressure sensor.
Replacement of all gaskets, o rings, and seals. (Including steam arm o rings, boiler gaskets, group head gaskets etc)
New original expobar shower screens and group head gaskets fitted.
New relays installed on the control board (these tend to fail after a while, so were replaced just in case).

The front panel of the machine was also fully restored using durable enamel paint and scratch resistant lacquer, as it was heavily scratched.

The stainless steel body panels have marks to be expected from age, as can be seen in the images, but are overall in great condition. Similarly, the groupheads have scratches in the chrome, but are still in great condition. Other flaws include one missing screw for the top panel (this does not affect anything), and a small section of cracked plastic on one side panel (see images).

Machine specifications:

11.5 Litre boiler.
2500W element.
Max. pressure 1.7 Bar.
2 Group Heads.
Water spout
Two steam arms

The machine is supplied with:

Two double spout portafilters and one single spout portafilter - the portafilters have surface marks due to wear and tear, and the chrome inside has stripped, but they function perfectly well.
Two double shot baskets and one single shot basket.
A Motta Competition Tamper
Two Latte Glasses
A cup stand for the drip tray - use it for smaller cups, or without for taller latte glasses.
A 3M water filter - I do not know how old this is, so would recommend replacing it if you have hard water.
An inlet hose for the filter and a inlet hose for the machine from the filter (both approx 1.5 meters long).
Two drain hoses (one approx 1 meter long, one approx 2.5 meters long).
Spare 6mm silicone hose for the boiler drain valve (left over after repairs).
Spare control board relay.

If you have any questions please send me a message, and I'll do my best to help. I'd welcome viewings of the machine, and it can be seen working if needed.

Delivery notes

Pallet delivery is available for £100, but may be cheaper depending on location - if the delivery cost is cheaper I'll refund the difference. If you are within 80 miles of LA94RL I can deliver for the cost of fuel (around £30, depending on location).
Collection in person is also available.